Yantai Ciso Lubrication Technology Co., Ltd.

Yantai CISO Lubrication Technology Co., Ltd.

We are a high-tech enterprise specializing in R&D and production of centralized lubrication systems.

Our company has more than 15 years of industry experience and more than 500 partners.

Factory direct sales

ODM&OEM service

Short delivery time

Reliable quality

Our main products in cludes the pump, the distributor and the block divider.

GT-PLUS is a piston pump predisposed to operate with a maximum of five pumping units, Its design is particularly suitable for progressive systems or single-line systems. Five independent line lubrication at the same time. Output can be combined and increase displacement With special materials, to achieve excellent anti-shock ability Special design of pump make it easy to observe the oil level and prevent UV radiation, prevent oil deterioration. With low liquid level alarm, flashing buzzer. Also can choose the type of output. Standard: Can be managed by an external PLC. Since it does not come with an internal control unit, this is the most economic solution for lubricating your systems. Automatic: With integrated control system, which can be set up local running time. Equipped with local operation and alarm light, alarm with buzzer, provide low level and pulse alarm, which can be combined with the monitor of distribution units into a perfect operating system.

Integral Leakless High Pressure Distributor Valve The DSP is a single block progressive divider valve that is ideal for applications where space is limited. It is available in 6, 8, 10, 12, 18, 20 and 22 outlet versions, each with an output of 0.2 cm³ Inch per cycle. The single output of the dosing device may be combined with the one located adjacent by eliminating the special fitting and applying a plug. An outlet can also be merged with the sequential outlet on the block by removing the special outlet fitting and installing a plug. Visual or electronic monitoring can be achieved simply by removing a plug and installing a visual or electronic add-on device as shown below. The spools in a progressive metering valve operate sequentially partitioning equally across the outlets, the grease being pumped into the metering block inlet. In the event of a blocked lubrication point all the spools will stop, thereby allowing the user to monitor the entire system with a single monitoring device. The grease pumped inside of the block is distributed by the piston dispensers of the progressive dosing device equally among the different outputs. In case a single output becomes blocked, the pistons stop their activity allowing for the control of the entire system by means of a single device for this purpose.

A typical VB distribution valve consists of a "first piece", a "tail piece" and 3 to 8 working pieces. Can provide 3 to 20 lubrication points of lubrication, VB distribution valve working piece, a variety of specifications of displacement for selection. The double outlet working piece (after the specification value of the working piece, the T represents the double outlet) has two oil outlets, which can be set as the side or upper output; The single outlet (after the specification value of the working piece, the S represents the single outlet) has one oil outlet, which can be at either end of the working piece, and the other end needs to be blocked. Note: That the double outlet working piece should not block any outlet, otherwise it will affect the normal operation. Magnetic and electronic proximity switch cycle indicators can be easily configured to provide positive protection for successful lubrication